· Pakistan’s newspaper advertisement archive
DailyAds.pk
Saved
Tenders Closes 07 Dec 2026

Education Works Division Jamshoro E-Tender for 11 Maintenance and Repair Works 2026–27

Jamshoro · Business Recorder,

Tender advertisement published in Business Recorder on Thursday, 19 November 2026, listed under Jamshoro. The last date printed on the advertisement is Monday, 7 December 2026.

Similar tenders

All tenders
Newspaper clipping: Education Works Division Jamshoro E-Tender for 11 Maintenance and Repair Works 2026–27, Business Recorder, 19 Nov 2026 Open the full-size clipping
Original clipping · Business Recorder · 19 Nov 2026 · tap to zoom

Advertisement details

The Office of the Executive Engineer, Education Works Division Jamshoro, invites eligible contractors and firms to submit electronic bids through the E-Pak Acquisition and Disposal System (EPADS) of SPPRA Sindh. Procurement will follow the Single Stage, Two Envelope procedure under SPPRA Rules 2010, as amended. The works form part of the Maintenance and Repair Programme 2026–27.

Notice reference: XEN/EduWorks/TC G-55/1312. Issue date: 16 November 2026.

Works Offered

Each work has a completion period of 12 months and a bidding document fee of Rs. 3,000. Estimated costs and bid securities in the following table are expressed in millions of rupees.

No.Work / SchemeTalukaEstimated Cost (Rs. Million)Bid Security (Rs. Million)
1Maintenance and repair of the XEN Office, Education Works Jamshoro, Taluka Kotri, District JamshoroKotri1.5020.075
2Maintenance and repair of GBPS Pandhi Khan Khaskheli, balance works, MC Kotri, Taluka Kotri, District Jamshoro; SEMIS Code 422010100Kotri2.4240.121
3Maintenance and repair of GBPS Pir Bajdi, UC Sindh University, Taluka Kotri, District Jamshoro; SEMIS Code 422010156Kotri2.8120.141
4Maintenance and repair of GBPS Amri, UC Amri, Taluka Manjhand, District Jamshoro; SEMIS Code 422040107Manjhand2.9060.145
5Maintenance and repair of GBHS Laki Shah Sadar, balance works, UC Sann, Taluka Manjhand, District Jamshoro; SEMIS Code 422040184Manjhand1.6580.083
6Maintenance and repair of GBELS Ali Abad, UC Unerpur, Taluka Manjhand, District Jamshoro; SEMIS Code 422040011Manjhand2.9040.145
7Maintenance and repair of GBPS Waris Mari, compound wall and lavatory block, UC Aazi, Taluka Sehwan, District Jamshoro; SEMIS Code 422020084Sehwan5.1140.256
8Maintenance and repair of GBPS Bandhri, UC Jhangara, Taluka Sehwan, District Jamshoro; SEMIS Code 422020247Sehwan2.3000.115
9Maintenance and repair of GBPS Kamal Khan Solangi, UC Talti, Taluka Sehwan, District Jamshoro; SEMIS Code 422020074Sehwan1.1940.060
10Maintenance and repair of GBPS Hajana, compound wall and lavatory block, UC Talti, Taluka Sehwan, District Jamshoro; SEMIS Code 422020023Sehwan5.1270.256
11Maintenance and repair of GBELS Loung Sunehro, balance works, UC Thano Arab Khan, Taluka T.B Khan, District Jamshoro; SEMIS Code 422030016T.B Khan3.1240.156

Eligibility

Contractors and firms must hold Pakistan Engineering Council registration for 2026–27 in the relevant field and appropriate category for school building works. Valid registration with the Sindh Revenue Board and Federal Board of Revenue, inclusion on the Active Taxpayer List, certificates where required, and a copy of the owner's or proprietor's CNIC are required.

For works with an estimated cost exceeding Rs. 4 million, PEC registration must cover the relevant CE-10 specialization for 2026–27 and extend to the tender amount of each work for which the firm bids.

Qualification Documents

Participating firms must submit details of completed building works for the last three years, 2024–2026, with documentary evidence and satisfactory completion certificates issued by the executing agency. These certificates must be issued by an officer not below the rank of Executive Engineer. Details of ongoing building works for 2024–2026 must also be supported by documentary evidence.

Provide details and documentary evidence of machinery and equipment available or hired for execution, together with the qualifications and experience of technical staff, their names, and key site-management staff.

Bank statements for the last three years, 2024–2026, must confirm cash availability equal to 20% of the estimated cost through updated statements. Statements downloaded or generated through mobile banking applications and attached to a company brochure or profile will not be accepted. Bidders must submit original bank statements duly stamped and signed by an authorized branch manager of a scheduled bank of Pakistan, demonstrating annual financial turnover, verified credit streams, and the firm's actual closing balance. A statement issued by a scheduled bank of Pakistan showing annual turnover equal to 80% of the estimated cost is also required.

Joint venture firms may not participate. Conditional tenders will not be entertained. The procurement agency reserves the right to reject any or all tenders subject to the applicable provisions.

Mandatory Requirements and Bid Conditions

An affidavit or undertaking on e-stamp paper must confirm that the firm was not involved in litigation and that no work was rescinded in the past. Attach a list of cases entered into arbitration or litigation and a list of works involving penalties, if any. An affidavit or undertaking on stamp paper must also confirm that the submitted information and documents are correct and true.

Bid security or earnest money must originate from the participating company's or firm's account. Instruments issued from personal, individual, or third-party accounts will be rejected immediately. Conditional electronic bids and bids without accompanying bid security will not be considered.

Past non-performance, abandonment of work, failure to complete work within the stipulated time, or unsatisfactory MEC performance in this division or any other division or department will constitute grounds for rejection under the applicable SPPRA Rules and standard procurement principles. The procuring agency may verify a bidder's performance with any Government of Sindh division or department and reject a firm with an adverse performance history.

Bids will be rejected automatically for overwriting, corrections, or incomplete schedule-of-prices and summary forms. The mandatory requirements specify earnest money in the form of a 5% call deposit. The call deposit and pay order must be issued in the participating firm's name, in favour of Executive Engineer Education Works Division Jamshoro, by a scheduled bank in Pakistan.

Hard copies of the original bid security, pay order for tender fees, and original e-stamp affidavit must be delivered before bid opening to the office of the Chairman Procurement Committee / Executive Engineer, Education Works Division Jamshoro. Submit them in a sealed envelope bearing the firm's name and the name of the work. Incomplete tenders, overwriting, or conditional bids will not be entertained.

The issuing bank branch will physically and telephonically verify the original call deposit or pay order before financial-bid evaluation. Unverified or fake instruments, or instruments backed by insufficient funds, will result in immediate rejection and referral to SPPRA for blacklisting.

Unworkable, unbalanced, or abnormally low rates compared with the Engineer's Estimate will be scrutinized under SPPRA Rule 43. Bidders quoting below rates must submit a detailed rate analysis and a matching additional bank call deposit as a differential cost guarantee for work quality. Failure to comply will invalidate the bid.

The procuring agency may physically inspect the bidder's ongoing or completed works to verify quality and performance. An adverse report or failure to find the machinery required at the specified sites will result in immediate rejection of the firm's technical capability.

The withholding agent intending to receive taxable services must indicate the applicable sales-tax rate in Form SSTW-05 to the extent prescribed in the rules. The tax must be deducted and withheld from payments to the service provider and deposited into the Government of Sindh account in the prescribed manner, under Rule 2(1)(q) and Rule 21(2).

Submission and Opening Schedule

StageDate and TimeMethod / Venue
Electronic bid submission deadline7 December 2026, 9:00 AMUpload bids through SPPRA Sindh EPADS at https://portalsindh.eprocure.gov.pk
Technical proposal opening7 December 2026, 10:00 AMOffice of the Executive Engineer, Education Works Division Jamshoro, opposite Irrigation Workshop, Kotri, District Jamshoro

Bidding documents must be downloaded from the SPPRA Sindh EPADS website. The technical proposals will be opened by the procurement committee in the presence of participating contractors or firms, or their authorized representatives. Financial bids will be opened later, with the date communicated through the portal after completion of technical evaluation. Bid validity is 90 days.

If undesirable circumstances arise on the submission or opening date, or the government declares a holiday, the tender will be opened on the next working day at the same time and venue. The submission date and time will remain unchanged.

Participants must upload only the documents required by this notice. Unnecessary documents may delay evaluation.

Issuing Office and Contact

Engr. Abdul Ghafoor, Executive Engineer, Education Works Division Jamshoro. Office address: opposite Irrigation Workshop, near NADRA Office, Kotri, Taluka Kotri, District Jamshoro. Telephone: 022-3874010. Email: xen.ewd.jamshoro@gmail.com.

Publication reference: INF/KRY/5217/2026.

Published in Business Recorder on Thursday, 19 November 2026. DailyAds.pk indexes newspaper advertisements; the original notice and the issuing organisation remain the source for final terms and eligibility.

Links printed in the advertisement

Also in Business Recorder · 19 Nov 2026

See all ads
Business Recorder · 19 Nov 2026
Fit